• Excellent degreasing power
• Free-rinsing properties & completely soluble in water
• Highly concentrated can be diluted with water.
• Non-hazardous, paint-friendly
• Readily biodegradable & practically non-toxic
• Efficient, easy to apply, and very cost-effective
• Non-corrosive, Non-flammable, and Not burn skin.
• Use as a cold or hot water degreaser
• Can be applied with a pressure washer via downstream injection.

Most suitable for removal of oil and grease from rig, machinery parts, bulkheads, decks and floor plates, engine room,oil spill and for tank cleaning.

SPRAYING/CLEANING METHOD

• Apply dilution of 1:1 (1 part of BIZYNE WATERBASED DEGREASER with 1 part of water) to the surface deposits area and allow product to wet the surface for 1-3 minutes. For moderate and light stain, a dilution of 1:5 are recommended, respectively.
  
• Wash down the solution with high pressure water.
  
• Repeat the first 2 step to give better results.
  
• Product can be diluted with cold and hot water.
  
• Rinse with water, temperature up to 60 ̊C always gives better results.
  
• For stubborn deposits some scrubbing may be necessary to accelerate removal.
  
  

SOAKING MACHINERY PARTS

• Dip parts to be cleaned into bath of 1:10 (1 parts of GREENSOLVS A501 INDUSTRIAL DEGREASER with 9 parts of water).
  
• Allow deposit to break up and loosen.
  
• Then rinse off with water.

• Ready Biodegradability (OECD 301D Closed Bottle Test-MPOB LAB)
• Non-toxic ecotoxicity (OECD 203 Fish, Acute Toxicity Test-MPOB LAB)
• Oil Dispersant Efficiency Index > 55% (Swirling Flask Test-FRI LAB)
• Non-toxic ecotoxicity (96 h Acute Static Bioassay, End Point Lethality-FRI LAB)
• Approve Oil Spill Dispersant by DOE Malaysia

GREENSOLVS A501 INDUSTRIAL DEGREASER is usually available in plastic drums of 20kg and 200kg.